Apollo Hi-Fi Furniture

APOLLO SPEAKER SUPPORT SYSTEMS

We give your speakers our full support.

It is our firm belief that speaker supports should be seen and not heard. Its why we use heavy gauge steel supports and steel bases to increase rigidity and sability, it’s why ,as standard, you’ll get sound – absorbing pads to isolate your speakers from the stand and adjustable spikes to isolate your stand from the floor.

Our range of low medium and high mass speaker stands are of the very highest quality. Most can be sand or shot filled to vary mass loading. Why?

Because at Apollo, we know that no two speaker types are alike. It’s why we make so many stands. Take a look at our range. You won’t find a better choice anywhere else.

THE AZ RANGE

A fully welded, single square steel pillar design. Supplied filled with silicone sand, or can be shot-filled. Provides stylish, high mass speaker support. Supplied with 8mm floor spikes rubber isolation pads.

THE A RANGE

A simple single, two, three or four column design of tubular steel that can be sand or shot filled for extra mass. Stable low mass support. Supplied flat-packed with 6mm floor spikes and neoprene speaker pads.

THE OLYMPUS RANGE

A very stable, single pillar design. Medium mass unfilled, high mass when sand or shot filled. Top plate can be rotated 90 to support different speaker shapes. Supplied flat packed with 8mm floor spikes and rubber isolation pads.

SR ADJUSTABLE SPEAKER SUPPORT

A simple, single-column design specifically for rear and side AV speakers. The adjustment will allow speakers to clear the height of your furniture allowing unobstructed sound.
Lightweight adjustable support, suitable for surround sound. Supplied flat-packed with adjustable floor spikes and neoprene speaker pads

SAT STAND SPEAKER SUPPORT

The Apollo SAT-1 Speaker Stands are a high-quality, universal satellite speaker stand, ideal for use with compact 5.1 speaker systems or with small speakers where height and a stable base is required.

They are finished in a choice of black or silver, feature chunky spikes on the heavily-weighted base and boast cable management, allowing you to run the speaker cable inside the central pillar.

THE AZ RANGE

Height:

AZ10 - 1000mm
AZ6 - 600mm
AZ5 - 500mm
AZ4 - 400mm
AZ3 - 300mm

Universal base plate:

230mm x 255mm

Top plates:

AZ6 / AZ10 - 150mm x 125mm
AZ4 / AZ5 - 180mm x 200mm
AZ3 - 178mm xx 178mm

THE OLYMPUS RANGE

Height:

OL6 - 600mm
OL5 - 500mm
OL4 - 400mm

Universal base plate:

230mm x 255mm

Top plates:

OL6 - 150mm x 125mm
OL5 - 130mm x 178mm
OL4 - 180mm x 200mm

SR ADJUSTABLE SPEAKER SUPPORT

Maximum Height:

SR100 - 1000mm
SR150 - 1500mm

Minimum Height:

SR100 - 610mm
SR150 - 860mm

Base plate:

245mm x 265mm

Top plates:

150mm x 125 mm
rotatable 90 degrees

THE A1

Height:

A1/9 - 900mm
A1/7 - 700mm
A1/6 - 600mm
A1/5 - 500mm
A1/4 - 400mm
A1/3 - 300mm
A1/2 - 200mm

Base plate:

230mm x 255mm

Top plates:

A1/9 - 150mm x 125mm
A1/7 - 150mm x 125mm
A1/6 - 178mm x 178mm
A1/5 - 178mm x 178mm
A1/4 - 178mm x 178mm
A1/3 - 178mm x 178mm
A1/2 - 178mm x 178mm

THE A2

Height:

A2/9 - 900mm
A2/7 - 700mm
A2/6 - 600mm
A2/5 - 500mm
A2/4 - 400mm
A2/3 - 300mm
A2/2 - 200mm

Base plate:

230mm x 255mm

Top plates:

178mm x 178 mm

THE A3

Height:

A3/9 - 900mm
A3/7 - 700mm
A3/6 - 600mm
A3/5 - 500mm
A3/4 - 400mm
A3/3 - 300mm
A3/2 - 200mm

Base plate:

230mm x 255mm

Top plates:

178mm x 178 mm

THE A4

Height:

A4/9 - 900mm
A4/7 - 700mm
A4/6 - 600mm
A4/5 - 500mm
A4/4 - 400mm
A4/3 - 300mm
A4/2 - 200mm

Base plate:

230mm x 255mm

Top plates:

178mm x 178 mm

THE SAT

Height:

900mm
(Including floor spikes)

Base plate:

255mm

Top plates:

90mm x 120mm
(can be mounted wide or deep)

Also supplied with bracket, 4 cone shaped spikes and cable management

ACCESSORIES

8x 8mm bottom spikes black

8x 8mm bottom spikes silver

8x 6mm bottom spikes with dome nuts

8x Top spikes

4x Adustable feet

4x Casters